Mazda 2 2024

Mazda 2 2024 Q&As

Check out real-world situations relating to the Mazda 2 here, particularly what our experts have to say about them.

• Mazda 2 Timing Belt or Chain - Which One Does It Have?

  It’s important to understand, but is the engine in your Mazda 2 timing belt or chain driven? That’s because a timing chain should last the life of the car with no extra maintenance, while a timing belt will need to be replaced at regular intervals. If you ignore timing belt changes, the belt can snap in service and destroy the whole engine.

  Fortunately, the engine in the Mazda 2 uses a timing chain, so should require no special maintenance for as long as the rest of the car is running properly. That gets around the problems of the cam drive belt replacement as well as the associated cost.

  This advice applies to both engines used in the Mazda 2 since 2002 and covers the ZY-VE engine (2002 to 2014) and the later V-P5 and F-P5 engines. It’s also dependent on regular oil changes and other maintenance having been carried out.

  Show more Show less
• What would be your recommendation when buying a small new car for teenage children learning to drive?

  The popular MG3 is the model you’re referring to and you’re right; it hasn’t been locally crash-tested. But it does lack some important safety gear. Enough, we reckon, to knock it off your short-list. The MG lacks, for instance, important driver aids such as autonomous emergency braking, blind-spot monitoring and lane-keeping assistance, nor can these features be had by spending more on a fancier version.

  Which leaves us with your other two choices, the Hyundai i30 and Kia Rio. Even then, you’ll need to option up beyond the base-model to get (some of) those safety features, but these are not expensive cars to begin with, so the jump might not be as bad as you think.

  The other car to consider would be the SP Pure version of the Mazda 2. At $23,690, it’s not over-priced but it does have low-speed (up to 30km/h) autonomous emergency braking, blind-spot monitoring and lane-departure warning as well as rear cross-traffic alert.

  And a manual transmission? The MG 3 no longer offers one, both the Hyundai i30 and the Kia Rio are available with a six-speed manual option. The Mazda 2 Pure SP is automatic only, but you can get a six-speed manual on the base-model Mazda 2.

  I agree that youngsters taught to drive a manual car tend to be better drivers, but that’s not a universally held view these days. And the fact is that most young drivers will never be presented with a clutch pedal in the future, raising the question of why learn in the first place? The reality is that learning to drive a manual car gives you extra mechanical awareness and extra ability to multi-task behind the wheel.

  Show more Show less
• Mazda 9 - Will we ever see a successor to the 929?

  Mazda is unlikely to introduce a sedan larger than the Mazda6, due to the declining sales of larger sedans globally in favour of SUVs.

  However, with Mazda marching upmarket and its ties with Toyota strengthening, a joint-venture project with Toyota or even Lexus, using Mazda's new rear-drive platform and inline six-cylinder engine range, may make a model-sharing luxury flagship – a modern-day 929 in other words – a possibility.

  But there are currently no plans that we know of pertaining to such a model, sadly.

  We hope this helps.

  Show more Show less
• Mazda 2 Bluetooth: How to Use Bluetooth in a Mazda 2?

  To connect your phone via Bluetooth to the Mazda 2, there’s a simple procedure to follow. The first thing to do is to make sure your phone has Bluetooth enabled and is switched to Visible/Discoverable. The second is to make sure that the car is stationary.

  The pairing procedure then goes as follows: Select the Settings icon on the info-screen in the car. Then select the Devices tab. Then select Bluetooth and turn the Bluetooth to On. Select Add Device and switch to the device operation.

  Using your phone, search for the car’s signal which should show as `Mazda’ from the list of devices on your phone’s screen. Depending on your phone, you then need to input the four-digit code (devices with Bluetooth 2.0) or a six-digit code displayed on the car’s screen (Bluetooth 2.1 or higher). That should complete the pairing process and form there you can add functions such as downloading your contact book to the car’s system by following the prompts.

  For more instructions on how to play music through the system, more setup options, and troubleshooting problems, refer to the vehicle’s owner’s manual.

  Show more Show less